Manual.ly Logo

Webasto Pure Handleiding

0,0 · 0 Beoordelingen

PDF handleiding · 66 Pagina's

Nederlands

M: QW-35-FL
pagina

/ 66

Loading...
e960bb56323879fb72c33dcf0aaadd4134da page 9
Webasto Pure 9
Set key-operated switch from OFF to ON:
– "Dim LED indicator" function activated.
The LED indicator changes to blue and dims in several
stages from maximum to minimum, in 3 second intervals.
After reaching the lowest dim level the LED indicator swit-
ches back to maximum.
If the key-operated switch setting is not changed
from ON to OFF within 180 seconds, the original dim
level will remain unchanged and the programming
mode will be deactivated.
Set key-operated switch from ON to OFF:
– Dim level is selected.
If the key-operated switch setting is not changed further
within 60 seconds, the selected dim level will be saved and
programming mode deactivated.
Set key-operated switch back from OFF to ON to switch
to standby mode.
9.3 Deactivate charging current limit (option 2)
The charging current limit is only activated in the
factory for a 22 kW variant.
The charging current is only limited to 20 A for
1-phase charging.
The charging current limit may only be deactivated
in compliance with country-specific regulations and
standards.
3
Programming mode activated
The LED indicator flashes white in the following sequence
once: 0.5s OFF;
0.5s ON;
0.5s OFF;
0.5s ON;
After a three second pause the LED indicator switches to
yellow for one second:
Set key-operated switch from OFF to ON:
– Activate "charging current limit" function.
The current setting is indicated in colour by the LED:
Charging current limit activated = purple
Charging current limit deactivated = light blue
If the key-operated switch setting is not changed
from ON to OFF within 60 seconds, the original
setting will remain unchanged and the programming
mode will be deactivated.
Set key-operated switch from ON to OFF:
3
Charging current limit activated:
– The 20 A limit is deactivated and the charging station
is configured to the maximum current value (see type
plate). The LED indicator changes to light blue.
3
Charging current limit deactivated:
– The 20A limit is activated. The LED indicator changes
to purple.
When the key-operated switch setting is not changed
further within 60 seconds, the selected setting will be saved
and programming mode deactivated.
Set key-operated switch back from OFF to ON to switch
to standby mode.
10 Decommissioning the product
A decomissioning shall be carried out only by an authorised
electrician.
Disconnect the power supply.
Electrically disconnect the charging station.
Disposal: see chapter 12.
11 Maintenance, cleaning, repair
11.1 Maintenance
Have maintenance carried out only by an authorised electri-
cian in accordance with local requirements.
11.2 Cleaning
DANGER
High voltages
Danger of fatal electric shock.
Never clean the charging station with a high-pressure
cleaner or similar device.
Clean the installation only with a dry cloth. Do not use
aggressive cleaning agents, wax or solvents.
11.3 Repair
Unauthorised repair of the charging station is not permit-
ted. In case of failure, the complete charging station must
be replaced.
Webasto Thermo & Comfort SE reserves the exclusive right
to perform repairs to the charging station.
The only repair to the charging station that is permitted
is to have the charging cable replaced by an authorised
electrician.
11.4 To replace the charging cable
DANGER
Hazardous voltages in the device
Danger of fatal electric shock.
The charging cable of the Webasto Pure must only
be replaced by an authorised electrician.
Before carrying out any work on the charging
station, switch off the power supply to the
charging station and secure to prevent restart
Make sure that the electrical connections are
safely isolated from the power supply.
Do not leave the charging station unattended with
the cover open.
Only use original Webasto spare parts.
Refer to the Webasto online shop for part numbers.
www.webasto-charging.com
Switch off and secure the power supply to the charging
station.
Remove cover of the connection terminals (Fig. 03).
Disconnect the electrical supply cable.
Remove the screws and washers at the bottom.
Detach the charging station from the mounting frame.
Remove cable clamp of the charging cable (Fig. 12; 1).
Disconnect PE conductor (Fig. 12: PE).
Open the maintenance flap on the back of the charging
station. (Fig. 13, 6). The cover is sealed.
Disconnect the remaining wires of the charging cable
(Fig. 13; 1-5).
Replace the charging cable.

Chat met je Webasto Pure-handleiding via AI

Krijg direct AI-antwoorden uit je Webasto Pure-handleiding

Vraag alles over Webasto Pure. Antwoorden komen uit deze handleiding, met de pagina's waarop ze zijn gebaseerd.

Pure Onderhoudsschema

Voor elk gebruik
Controleer het laadstation op zichtbare schade

Inspecteer het laadstation, de kabel en de koppeling voor elk gebruik op zichtbare schade. Gebruik het apparaat niet als het beschadigd is.

Naar behoefte
Reinig de behuizing met een droge doek

Veeg de installatie alleen af met een droge doek. Gebruik nooit hogedrukreinigers, agressieve middelen, was of oplosmiddelen.

M: qwen/qwen3.8-flash

Stel eenVraag

0/1000

Beveel je Pure aan?

Ja Nee

Veelgestelde Vragen

A

Nee, installatie en elektrische aansluiting moeten strikt worden uitgevoerd door een geautoriseerde elektricien om veiligheid en naleving van lokale voorschriften te waarborgen.

Is dit antwoord nuttig?

A

Een paarse LED geeft aan dat de laadstroomlimiet is geactiveerd, wat doorgaans de input beperkt tot 20 A voor enkel-fase laadconfiguraties.

Is dit antwoord nuttig?

A

Druk lang op de touchbedieningsschakelaar gedurende ten minste 10 seconden om een systeemzelftest te starten en storingen te resetten nadat ze zijn verholpen.

Is dit antwoord nuttig?

A

Ja, het heeft een IP54-rating die gebruik in beschermde buitenruimtes zoals carports toelaat, maar het mag niet worden blootgesteld aan directe regen of hogedrukreinigers.

Is dit antwoord nuttig?

A

U kunt de stroom configureren met behulp van DIP-schakelaars, maar sommige modellen hebben fabrieksbeperkingen die niet kunnen worden overschreden, zoals het upgraden van een 11 kW-unit naar 22 kW.

Is dit antwoord nuttig?

M: QW-35-FL

Voordelen en Nadelen

Voordelen

  • Geïntegreerde residual direct current monitoring verbetert de veiligheid tegen DC-fouten
  • Strakke zwarte afwerking past naadloos in moderne architectonische stijlen
  • DIP-schakelaars stellen flexibele configuratie mogelijk voor 1-fase of 3-fase systemen
  • IP54-beschermingsklasse zorgt voor duurzaamheid tegen stof en water
  • Intuïtieve LED-indicatoren bieden duidelijke visuele statusupdates
VS

Nadelen

  • Installatie vereist een gecertificeerde elektricien wat initiële kosten toevoegt
  • LED-waarschuwingskleur kan niet worden gedimd in tegenstelling tot standby-kleuren
  • Maximaal vermogen kan standaard worden beperkt tot 20 A voor enkel-fase setups
  • Unit kan niet worden geüpgraded van 11 kW naar 22 kW via software na fabrieksconfiguratie
  • Vervanging van laadkabel is beperkt tot geautoriseerde professionals
M: QW-35-FL

Product Specificatie

Aantal oplaadpunten

1

Opladmodus

IEC 61851-1 (Modus 3)

Aantal fasen

3-fase

Spanning

400V (wisselstroom)

Connectortype

Type 2

Verbindingsstype

Kabel 4,5m

Installatie

Muurbevestiging

Autorisatie

Sleutelschakelaar

Beschermingsklasse

IP54

Afmetingen

22,5x44,7x11,6cm (BxDxH)

M: QW-35-FL

Product Beschrijving

Ontdek de Webasto Pure Black Edition Handleiding

De Webasto Pure Black Edition vertegenwoordigt een hoogtepunt in elektrische voertuigen laadtechnologie, waarbij strakke esthetiek wordt gecombineerd met robuuste prestaties. Ontworpen voor zowel residentiële als commerciële omgevingen, zorgt deze laadpaal voor veilige, efficiënte en betrouwbare stroomlevering aan uw elektrische voertuig. De handleiding dient als uw uitgebreide gids om het volledige potentieel van dit apparaat te ontsluiten, met gedetailleerde inzichten in installatie, bediening en onderhoud zonder overbodige jargon.

Werkt binnen de strikte veiligheidsparameters van IEC 61851-1 normen, gebruikt de Webasto Pure geavanceerde laadmodus 3 technologie. Dit zorgt ervoor dat spanning alleen wordt toegepast zodra het voertuig veilig is aangesloten, waardoor zowel de auto als de gebruiker worden beschermd tegen elektrische gevaren. Het apparaat beschikt over een intuïtief LED-indicatorsysteem dat status in één oogopslag communiceert, variërend van standby blauw tot actief groen en fout rood. Of u nu configureert voor een 1-fase of 3-fase aansluiting, de DIP-schakelaarinstellingen stellen precieze stroomkalibratie mogelijk tot 22 kW.

Veiligheid is leidend in het ontwerpfilosofie van Webasto Thermo & Comfort SE. De Pure Black Edition bevat geïntegreerde residual direct current monitoring om gevaarlijke DC-foutstromen te voorkomen. Installatie moet worden uitgevoerd door een gekwalificeerde elektricien die juiste aarding en naleving van lokale voorschriften met betrekking tot zekeringen en RCD's kan waarborgen. Het apparaat is gebouwd om harde omstandigheden te weerstaan met een IP54-rating, waardoor het geschikt is voor garages, carports en beschermde buitenruimtes terwijl het bestand is tegen stof en waterstralen.

Naast standaard laden, biedt de Webasto Pure aanpasbare functies toegankelijk via zijn sleutelschakelaar. Gebruikers kunnen de programmeermodus invoeren om LED-helderheid aan te passen of de 20 A laadstroomlimiet op specifieke varianten uit te schakelen, mits lokale wetgeving dit toestaat. De meegeleverde montagekit vereenvoudigt wandinstallatie, waardoor het apparaat stabiel en veilig blijft. Door de richtlijnen in de Webasto Pure Black Edition Handleiding te volgen, kunnen eigenaren genieten van een naadloze laadervaring die prioriteit geeft aan levensduur, veiligheid en efficiëntie.

M: QW-35-FL

© Copyright 2026 Manual.ly