Manual.ly Logo

Tunturi Centuri T100 Handleiding

0,0 · 0 Beoordelingen

PDF handleiding · 106 Pagina's

Nederlands

M: QW-35-FL
pagina

/ 106

Loading...
5043c9df716d6a256c9459773355b89e8bb7 page 18
• Prevent that the solution comes between running deck and
running belt at all times.
This should be done on a regular basis to extend belt and running
deck life.
Lubrication (fig. F-6)
‼ NOTE
• The Treadmill running belt is pre lubricated before fitting on your
treadmill during the production of the unit. Therefore it is not
needed to lubricate the running belt when taken into use for the
first time.
The running belt must be checked for lubrication condition regularly.
Therefore the treadmill comes with a 300 hours reminder function.
The “TIME WINDOW” will display “OIL” and will make an acoustic
beeping sound every 10 seconds to remind you. Follow the below
checking procedure and eliminate the “OIL” message and acoustic
warning signal by pressing and hold the “STOP” button for at least 3
seconds during this warning signal.
⚠ WARNING
• Before lubrication, remove the mains plug from the wall socket.
⚠ CAUTION
• We recommend to check the running belt lubrication at least
once every month, as more factors than time can be effective to
the lubricant conditions.
• Only lubricate the running belt if necessary. If you apply too
much lubricant, the running belt will slip easily due to lack of
friction.
- Stand steadily on the running belt.
- Take hold of the front handlebar and push the running belt with
your feet so that it slides back and forth. The running belt must
move smoothly and evenly without making sound.
- If the running belt does not move smoothly and evenly or if the
running belt does not move at all, touch the underside of the
running belt with your fingertips to check the lubrication:
• If you feel lubrication or your fingertips are shiny, there is
sufficient lubrication on the running belt.
• If you do not feel lubrication or your fingertips are dusty or
rough, apply lubricant (±10 ml.) in the middle of the running
deck under the running belt and let the equipment operate at
5km/h for at least 5 minutes.
• After lubrication, do not fold the equipment before having done
a workout for 2 minutes with a speed of at least 5 km/h.
This will cause the lubricant being fully absorbed by the running
belt and being spread evenly.
‼ NOTE
• When 5 km/h is too fast for you, do walk at your desired speed,
but extend the duration to at least 5 minutes.
Click to see our supportive YouTube video
https://youtu.be/ceaOYnofY5k
Belt adjustments
The performance of your treadmill is dependent on the frame running
on a reasonably level surface. If the frame is not level, the front and
back roller cannot run parallel, and constant belt adjustment may be
necessary.
The treadmill is designed to keep the running belt reasonably centred
while in use. It is normal for some belts to drift near one side while
the belt is running with no one on it. After a few minutes of use,
the running belt should have a tendency to centre itself. If, during
use, the belt continues to move toward one side, adjustments are
necessary.
EXCEPTION
During rehabilitation where the user is using one leg much stronger
than the other, it might happen that the running belt drifts to one
side. In these cases you should not adjust unless the running belt
does not centre itself during normal condition usage.
Belt tension adjustment
Adjustment must be made from the rear roller. The adjustment bolts
are located at the end of the step rails in the end caps.
- Tighten the rear roller bolts (clockwise) only enough to prevent
slippage at the front roller. Turn both running belt tension
adjustment bolts in increments of 1/4 turn each and inspect for
proper tension by walking on the belt at a low speed, making sure
the belt does not slip. Keep tensioning the bolts until the belt
stops slipping.
- If you feel the belt is tight enough, but it still slips, the problem
may be a loose Motor drive belt under the front cover.
- Do Not Over-tighten
Over tightening will cause belt damage and premature bearing
failure.
Click to see our supportive YouTube video
https://youtu.be/pp4_4bL1MXo
Centre the running belt (fig. F-5)
Centre the running belt is needed when your running belt is not
tracking in the centre of your running surface. This is noticed easily
when the gap between side landing and running belt is significantly
bigger on one side compared to the other side.
This can be caused by a few reasons, such as:
REASON 1
You do a workout using one leg more powerful in push off during
your workout. This causes the belt being pushed aside, but will
correct automatically when let the running belt run unloaded for a few
minutes.
REASON 2
Your treadmill is not levelled horizontally, where gravity pulls the
running belt slowly to the lowest end of the treadmill. This must be
corrected by levelling the treadmill correctly. as this cannot be solved
by any other adjustment.
REASON 3
The running belt is not centred correctly between the front and rear
roller drum. This needs be corrected by adjusting the running belt
tracking as described below.
To adjust the running belt’s tracking use the Allen key being provided
with your treadmill.
- Set your treadmill at a speed of ± 5 km/h, not running on it.
- When the running belt is tracking to the right side.
Turn the left-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- When the running belt is tracking to the left side.
Turn the right-hand rear roller adjustment bold, located on the rear
end in a socket in the rear roller cover, counter clockwise for 1/4
turn.
- Await ±2 minutes to give the running belt the time to respond to
the adjustment before repeating the adjustment steps if needed to
get to the desired result.
24
English

Chat met je Tunturi Centuri T100-handleiding via AI

Krijg direct AI-antwoorden uit je Tunturi Centuri T100-handleiding

Vraag alles over Tunturi Centuri T100. Antwoorden komen uit deze handleiding, met de pagina's waarop ze zijn gebaseerd.

Centuri T100 Onderhoudsschema

Herinner mij wanneer onderhoud nodig is
Maandelijks
Voer algemene onderhoudscontrole uit

De handleiding stelt dat de trainer maandelijks onderhoud nodig heeft, zelfs als deze niet in gebruik is. Koppel de stroom los voordat u begint.

Maandelijks
Stofzuigen onder de loopband

Koppel het netsnoer los en stofzuig onder de loopband om te voorkomen dat stof en huisdierhaar de luchtinlaten blokkeren.

Maandelijks
Reinig loopvlak en band

Veeg de rand van de band en het gebied tussen de band en het frame af met een droge doek. Gebruik een nylonborstel op het oppervlak van de band.

Maandelijks
Controleer smering van de loopband

Controleer of de band soepel beweegt. Als deze stoffig of ruw aanvoelt, breng dan ongeveer 10 ml smeermiddel aan onder het midden van de band.

Na elk gebruik
Reinig apparatuur met zachte doek

Veeg de apparatuur na elk gebruik af met een zachte, absorberende doek om zweet en vuil te verwijderen.

Regelmatig
Stofzuigen zichtbare delen

Gebruik een stofzuiger met een kleine zuigmond om regelmatig de zichtbare delen van de apparatuur schoon te maken.

Regelmatig
Controleer stevigheid van schroeven en moeren

Inspecteer periodiek alle schroeven en moeren om ervoor te zorgen dat ze strak en veilig vastzitten.

Elke 300 uur
Controleer smeringsconditie

Het display toont 'OIL' en piept elke 10 seconden na 300 bedrijfsuren om u eraan te herinneren de smering te controleren.

Zo nodig
Stel banduitlijning bij

Centreer de loopband met behulp van de inbussleutel als deze tijdens gebruik naar één kant afwijkt. Stel de bouten van de achterste rol in stappen van 1/4 slag bij.

Gratis onderhoudsherinneringen

Afgestemd op uw aankoopdatum. Altijd gratis, op elk moment afmelden.

Door te verzenden gaat u akkoord met het privacybeleid. U kunt zich met een klik afmelden in elke e-mail.
M: qwen/qwen3.8-flash

Stel eenVraag

0/1000

Beveel je Centuri T100 aan?

Ja Nee

Veelgestelde Vragen

A

De loopband is ontworpen om een maximaal gebruiker gewicht van 135 kg of 300 lbs te ondersteunen. Het overschrijden van deze limiet kan de apparatuur beschadigen en de garantie ongeldig maken.

Is dit antwoord nuttig?

A

Nee, de borststrap is niet inbegrepen in het standaardpakket. Deze moet apart worden gekocht als accessoire als u voorraadloze hartslagmeting verkiest boven de handsensoren.

Is dit antwoord nuttig?

A

Wanneer de OIL-boodschap verschijnt, houdt u de STOP-knop minstens drie seconden ingedrukt tijdens het akoestische waarschuwingssignaal om de boodschap te wissen en de timer te resetten.

Is dit antwoord nuttig?

A

Ja, het console ondersteunt Bluetooth-connectiviteit voor zowel iOS- als Android-apparaten, zodat u uw trainingsgegevens kunt synchroniseren met compatibele fitnessapplicaties.

Is dit antwoord nuttig?

A

Montage vereist minimaal twee personen vanwege het gewicht van het frame. Het zorgvuldig volgen van de geïllustreerde stappen in de handleiding zorgt voor een juiste opstelling en veiligheid.

Is dit antwoord nuttig?

A

Als de veiligheidssleutel uit de consolesleuf wordt getrokken, stopt de loopband onmiddellijk om letsel te voorkomen. Het console geeft ook een E7-foutcode weer totdat de sleutel opnieuw wordt ingebracht.

Is dit antwoord nuttig?

M: QW-35-FL

Voordelen en Nadelen

Voordelen

  • Maximale gebruiker gewichtslimiet van 135 kg zorgt voor stabiliteit voor zwaardere gebruikers
  • 36 vooraf ingestelde programma's plus 3 door de gebruiker gedefinieerde opties bieden diverse trainingsvariatie
  • Bluetooth-connectiviteit maakt naadloze integratie met fitnessapps en apparaten mogelijk
  • Inklapbaar ontwerp met transportwielen vergemakkelikt opslag en verplaatsing
  • Hellingsbereik van 0 tot 15 niveaus voegt intensiteit toe en simuleert buitenterrein
VS

Nadelen

  • Handpolsensoren kunnen aan nauwkeurigheid verliezen als de huid te droog of zweterig is
  • Hartslagborststrap wordt apart verkocht als accessoire
  • Smeringsherinnering vereist handmatige reset na toepassing
  • Montage vereist minimaal twee personen vanwege zware componenten
  • Consoledisplay kan bevriezen bij blootstelling aan direct zonlicht of zweet
M: QW-35-FL

Product Specificatie

Kleuren

zwart, goud

Vermogen

3,7 kW continu

Snelheid

0,8-20 km/u

Helling

0-15% elektronisch verstelbaar

Loopoppervlak

140x51 cm

Max. gebruikersgewicht

99,8 kg

Afmetingen

178x84x142 cm

Opgevouwen formaat

102x84x155 cm

Gewicht

82,5 kg

Functies

transportwielen, polsslagmeters, borstband compatibel, fleshouder, app-ondersteuning (iOS, Android), Bluetooth, inklapbaar

M: QW-35-FL

Product Beschrijving

Ontdek de Tunturi Centuri Performance T100 Loopband

De Tunturi Centuri Performance T100 Loopband vertegenwoordigt een belangrijke stap vooruit in fitnesstechnologie voor thuis, ontworpen om gebruikers van alle niveaus te accommoderen. Of u nu een beginner bent die uw reis wilt beginnen of een gevorderde atleet die uitdagende trainingen zoekt, deze loopband biedt de veelzijdigheid die nodig is voor effectieve training. De handleiding benadrukt de robuuste constructie en gebruiksvriendelijke interface, waardoor het een ideale keuze is voor mensen die waarde hechten aan kwaliteit en prestaties.

Deze loopband beschikt over een krachtige motor met snelheden variërend van 0,8 tot 20,0 km/u, zodat elke training op specifieke doelen kan worden afgestemd. Met 36 vooraf ingestelde programma's en drie aanpasbare gebruikersprofielen kunt u uw routine eenvoudig variëren om verveling te voorkomen en resultaten te maximaliseren. De hellingfunctie stelt u in staat tot 15 niveaus aanpassing, wat klimmen simuleert en de intensiteit van uw cardio-sessies verhoogt zonder dat u de snelheid excessief hoeft te verhogen.

Veiligheid is van cruciaal belang volgens de richtlijnen van de Tunturi Centuri Performance T100 Loopband Handleiding. Het console bevat essentiële veiligheidsfuncties zoals een magnetische veiligheidssleutel die de machine onmiddellijk stopt als deze losraakt. Daarnaast bieden de polshartslag sensoren real-time hartslagbewaking, waardoor u binnen uw doelzone blijft. Voor nauwkeurigere gegevens ondersteunt het apparaat Bluetooth-connectiviteit met externe borststraps en mobiele apps, zodat u uw voortgang naadloos kunt volgen op iOS- en Android-apparaten.

Onderhoud is eenvoudig dankzij ingebouwde herinneringen voor riem smering en reinigingsinstructies in de documentatie. Het inklapbare ontwerp bespaalt waardevolle ruimte wanneer het niet wordt gebruikt, terwijl de transportwielen eenvoudige verplaatsing rondom uw huis mogelijk maken. Met een maximale draagkracht van 135 kg zorgt deze loopband voor duurzaamheid en stabiliteit voor jarenlang betrouwbaar gebruik.

M: QW-35-FL

© Copyright 2026 Manual.ly